Get a Free Quote
Industrial workwear manufacturing facility with production line
Factory Direct
PRODUCTS Trade Workwear

Factory-Direct · Built to Spec · Verified QC

Heavy-Duty Trade & Technical Workwear Manufacturers for Bulk Procurement

Built to gram weight, seam spec, and wash life — not to a price point.

ANSI 107 hi-vis. NFPA 2112 flame-resistant. EN 1149 anti-static. Work jackets, triple-stitched pants, FR coveralls, and wicking shirts cut to your gram weight and seam spec. LantaoWork is a factory-direct custom workwear manufacturer — every fabric, certification, and stitch verified under one roof.

Heavy-Duty Workwear Categories

EVERY GARMENT.
EVERY ENVIRONMENT

From ANSI-compliant hi-vis to NFPA 2112-rated flame-resistant — six workwear categories, each built to the gram weight, seam spec, and compliance demands of the trade it serves.

Hi-visibility workwear — ANSI 107 vests and jackets

Hi-Visibility Workwear

4–7 oz (140–240 gsm) · ANSI 107 Class 1–3

01

ANSI/ISEA 107-compliant high-visibility vests, shirts, and jackets. Segmented reflective tape, fluorescent base fabrics, and class 1-3 configurations for every job site risk level.

Production Note

Reflective tape is where hi-vis fails — integrated tape channels keep it flat through laundering.

See the Hi-Vis Line →
Work jackets and outerwear — insulated softshell and hi-vis jackets

Work Jackets & Outerwear

10–12 oz shell (340–400 gsm) · YKK hardware

02

Insulated, softshell, and hi-vis work jackets with reinforced stress points, YKK zippers, and custom lining options. Built for cold-weather outdoor shifts and temperature-controlled facilities.

Production Note

Zippers and shoulder seams take the abuse — YKK hardware, stress points reinforced before assembly.

Inquire Now →
Work pants and bottoms — ripstop and canvas cargo work pants

Work Pants & Bottoms

8–12 oz (270–400 gsm) · triple-stitched seams

03

Ripstop, canvas, and stretch-twill work pants with articulated knees, gusseted crotch, and tool pocket systems. Triple-stitched seams rated for 80+ industrial launderings.

Production Note

Rated for 80+ industrial launderings — triple-stitched seams and a gusseted crotch that survives squatting.

Inquire Now →
Classic work shirts — long and short sleeve button-down work shirts

Classic Work Shirts

5.5–7 oz (185–235 gsm) · reinforced collar and cuff

04

Long and short-sleeve work shirts in moisture-wicking, anti-microbial, and FR fabrics. Button-down, polo, and henley configurations with reinforced collars and cuffs.

Production Note

Collars and cuffs fray first — reinforced there, and the wicking finish survives 80+ launderings.

Inquire Now →
Coveralls and boilersuits — full-body FR and poly-cotton coveralls

Coveralls & Boilersuits

6–9 oz (200–305 gsm) · two-way zip · reinforced knees

05

Full-body coveralls in cotton, poly-cotton, and FR blends. Two-way front zippers, elasticized waists, reinforced knees, and multi-pocket layouts for industrial environments.

Production Note

Knees and the zip take the wear — reinforced at the pattern stage, not patched on later.

See the Coverall Line →
Specialty technical workwear — flame-resistant and arc-rated garments

Specialty & Technical

7–9 oz (240–305 gsm) · FR, arc, anti-static in one garment

06

Flame-resistant (FR), arc-rated, chemical-splash, and anti-static workwear. NFPA 2112, ASTM F1506, EN 1149, and IEC 61482 compliant fabrics manufactured to spec.

Production Note

Four standards in one garment — FR, arc, anti-static and splash specs are verified per batch.

See the FR Line →
Performance Fabric Technologies

ENGINEERED FABRICS

Four fabric technologies — each tested to industrial standards with verifiable lab reports. No mystery blends, no unsubstantiated claims. Every fabric spec is backed by third-party certification documentation.

Flame-Resistant (FR) fabric technology
01

Flame-Resistant (FR)

NFPA 2112 and ASTM F1506 certified FR fabrics — Nomex, Kevlar blends, and FR-treated cotton. Arc-rated PPE Category 1-4. Self-extinguishing fibers for refinery, chemical, and electrical environments.

6.5–9 oz (220–305 gsm) NFPA 2112 · ASTM F1506 · IEC 61482
High-Visibility Base fabric technology
02

High-Visibility Base

ANSI/ISEA 107 fluorescent fabrics with integrated reflective tape channels. Lime-yellow and orange-red base options. Class 1-3 configurations for traffic, construction, and low-light hazard zones.

4–7 oz (140–240 gsm) ANSI/ISEA 107 · EN ISO 20471
Anti-Static & ESD fabric technology
03

Anti-Static & ESD

EN 1149 anti-static fabrics with carbon-core grid fibers. Surface resistivity below 10⁸ Ω. Cleanroom-compatible options with sealed seams for electronics, pharmaceutical, and petrochemical environments.

4.5–6.5 oz (150–220 gsm) EN 1149-5 · EN 61340-5-1
Moisture-Wicking & Durability fabric technology
04

Moisture-Wicking & Durability

Polyester-cotton and 100% polyester performance blends with capillary wicking, antimicrobial treatment, and stain-release finish. 80+ industrial launderings. OEKO-TEX STANDARD 100 Class I certified for skin-contact safety.

5–6.5 oz (170–220 gsm) OEKO-TEX 100 · ISO 12947 Abrasion
Weave Comparison

SIX WEAVES, SIDE BY SIDE

Workwear fabric weaves compared by weight in ounces and GSM, durability, breathability, stretch, and best use.
Weave Weight GSM Durability Breathability Stretch Best For
100% Cotton 7–10 oz 240–340 High High None Work shirts, light pants, coveralls
Twill Weave 9–12 oz 305–405 Very high Medium–high None Work trousers, jackets, coveralls
Poly-Cotton (65/35) 6.5 oz 220 High Low–medium Minimal Work shirts, light jackets
Ripstop 4.5 oz 155 Very high Low–medium None Rainwear, outer shells, field gear
Oxford 8–10 oz 270–340 Very high Low–medium None Work jackets, outerwear
4-Way Stretch 5 oz 170 Medium–high Very high 4-way Performance polo, base layers, cargo pants
What Happens to Your Order — Gate by Gate

SIX INSPECTIONS
BEFORE SHIPMENT

Your order doesn't get one check at the end — it passes six independent inspection gates, from raw material to packed carton. If a gate fails, the order stops. Here's exactly what happens at each one.

01

Raw Material Intake

Incoming QC Lab ISO 2859-1 · AQL 2.5

Every fabric roll, zipper lot, and reflective tape spool checked against spec before entering inventory. Gram weight, weave density, colorimetry (delta E ≤ 1.5), FR rating verified on receipt. Non-conforming material quarantined and returned.

02

Pattern & Cut Verification

Cutting Room QC Internal SOP · 12-Point Measure

First-piece from each marker measured across 12 control points. Ply height tolerance ±2mm. Fabric defects chalk-marked during spreading — any defective panel discarded before it reaches a sewing machine.

03

In-Line Stitching Audit

Floor QC Inspector AQL 2.5 · ISO 4915 Stitch Count

Random grab-sample from every operator, every 90 minutes. Seam strength on a tensile rig, stitch count against spec, bartack placement. A failing sample triggers immediate station shutdown and root-cause review.

04

End-of-Line Full Garment Check

Final QC Station 17-Point Checklist · ANSI/ISEA 107

17-point inspection: seam alignment, pocket symmetry, zipper function, button pull-strength, reflective tape position (±2mm), label legibility, color under D65 light. Hi-vis garments: retroreflectivity measured against ANSI/ISEA 107.

05

Third-Party Lab Certification

Independent ISO 17025 Lab NFPA 2112 · ASTM F1506 · EN 1149

Samples from every production lot sent to an independent ISO 17025-accredited lab. FR tested to NFPA 2112, hi-vis to ANSI/ISEA 107, anti-static to EN 1149. Each report carries your purchase order number.

06

Pre-Shipment Final Audit

QA Manager AQL 2.5 Level II · ISO 9001:2015

AQL 2.5 Level II sampling from packed cartons. Size distribution, labels, barcodes, packaging integrity. Above-threshold failures trigger 100% re-inspection. Certificate of Conformity and full compliance file ship with the goods.

Every shipment includes: lot-specific lab reports, certificate of conformity, AQL 2.5 inspection report, and barcoded packing list.

Request a Sample QC Report →
Unlimited Customization

MAKE IT YOURS

Six decoration methods across soft goods and hard accessories — each with verified wash-cycle durability data, so you know which method fits your crew's actual daily conditions.

Custom workwear with professional embroidery branding
01

Embroidery

Durability Focus

Industrial-grade thread stitching that survives 80+ commercial wash cycles. Up to 15 thread colors per design, 1,200 SPM multi-head machines. Premium left-chest, back, and sleeve placement with 2mm registration tolerance.

Screen printed workwear with bold custom graphics
02

Screen Printing

Bold Graphics

Plastisol and water-based inks for bold, opaque graphics on cotton and poly-cotton workwear. 50+ wash durability. CMYK process for photorealistic designs. Ideal for large-format back prints and safety text.

DTF printed custom workwear with vibrant full-color design
03

DTF Printing

Small Runs

Direct-to-Film transfers for full-color designs on any fabric type — including polyester hi-vis and nylon shells. Vibrant photorealistic output, 40+ wash durability. No setup charges. Fast 48-hour sampling.

Dye sublimation custom workwear with all-over print design
04

Dye Sublimation

All-Over Prints

Full-coverage, edge-to-edge dye infusion into polyester fabrics. Zero hand-feel, never cracks or peels — graphics become part of the fiber. Unlimited colors, photographic output on performance work shirts and hi-vis base layers.

Custom woven labels for workwear branding and compliance tags
05

Woven Labels

Premium Detail

Damask and satin-stitch woven labels with metallic thread options. 150+ thread-count density for micro-text legibility. Sewn-in or heat-seal backing. Size labels, care tags, and brand labels with compliance markings.

Laser engraved custom workwear accessories and hard goods
06

Laser Engraving

Permanent Marking

Precision CO2 laser etching on hard goods and accessories — helmets, hard hats, PPE cases, equipment badges. Permanent, zero-fade markings. Ideal for serial numbering, asset tracking, and department identification.

Case Studies

PROVEN ON THE FLOOR

“
We needed 800 FR hi-vis jackets for our construction crews — ANSI 107 Class 3, NFPA 2112 certified, with company logo embroidery and name labels for 180 individual workers. LantaoWork managed the entire size matrix from our roster spreadsheet, delivered fit samples in 5 days, and completed full production in 28 days. Every jacket matched the spec — reflective tape placement within 2mm tolerance, Pantone-matched embroidery with delta E under 1.5. No exchanges, no returns, no crew downtime.
Cecilia B. Castro
Cecilia B. Castro Procurement Director · National Construction Group
800 FR Hi-Vis Jackets
“
We had a contract deadline with penalties — 3,500 units across hi-vis vests, work shirts, and cargo pants, all with custom screen printing. LantaoWork split production across 4 lines, ran inline QC at every station, and air-freighted half the order to hit our distribution deadline. Sixteen days from signed PO to delivery at three warehouse locations. The AQL 2.5 inspection reports came with the shipment — zero major defects across the entire order.
Troy T. Giles
Troy T. Giles Operations Manager · Regional Transport Authority
3,500 Units · 16 Days
Straight Answers for Procurement Teams

QUESTIONS WORTH ANSWERING

What gram weight should we specify for work pants and jackets?
+

Work pants run 8–12 oz (270–400 gsm) — 8–9 oz for a lighter twill, 11–12 oz canvas or duck for high-abrasion roles like welding, rigging, and heavy equipment. Jacket shells run 10–12 oz (340–400 gsm) because the shoulder and sleeve carry the most abrasion. Shirts sit at 5.5–7 oz (185–235 gsm): lighter is cooler, but below 5 oz the collar and cuff edges break down long before the laundering cycle does. Tell us the role and the wash environment and we spec from there.

How is triple stitching different from a reinforced single seam?
+

Three parallel rows of thread instead of one, run at the seat seam, inseam, cargo pocket corners, and belt loops — the points that fail first under load. Load spreads across three stitch lines instead of one, so the seam keeps holding after a single line breaks. We verify it twice: stitch density per inch against the tech pack at in-line audit, and a seam strength pull on the tensile rig during first-piece and production checks.

How many industrial wash cycles will the garment survive?
+

Work pants and shirts are built to a rating of 80+ industrial launderings at commercial temperatures. Fabric tear strength and colorfastness are retested at 25-cycle intervals, and shrinkage is held to a 3% maximum so garments do not shrink out of size across a laundry contract. Reflective tape and FR treatment carry their own separate ratings — they are specified by standard, not by garment weight.

Will a reorder match the original spec exactly?
+

Yes. The first approved piece becomes the reference standard. We archive the digitized tech pack, the graded size set, the marker, and the fabric lot reference, then measure the first piece of every reorder against it. Fabric lot changes are flagged before cutting, because the same spec from a different mill run can shift shade or hand-feel. If a new lot cannot match, you hear it before production — not after delivery.

What size range can you cut, and how is grading handled?
+

Men's XS–5XL and women's XS–4XL as standard, with tall and regular inseams cut separately. Grading runs from your size set or ours; for crews over 200 people we grade against your roster and print name and size labels to match. MOQ is 100 units per style, and sizes can be mixed within that 100.

Factory Direct

YOUR ORDER STARTS HERE

Send us your spec. We'll ship fit samples in under a week — wear-test them on your crew, then decide.