Table of Contents
The short answer For a UK tender, start with Wearwell (auditable factory, published DoCs) and LS International (rail, utilities and oil & gas). For CMT or private label, B S Suthi & Bros; for emergency-services coveralls, Derby Unitex. Only three of the ten publish garment-level DoCs and none publish an MOQ, so ask for both in writing.
This shortlist was built like a procurement shortlist, not a shopping list. Ten suppliers were checked against five criteria: published factory visibility, garment-level certification evidence, customization depth, repeat-order reliability, and auditability for HSE and ISO 9001 checks.
In UK buying language, boiler suit and coverall mean the same garment, and this is a commercial review rather than a cheapest-price ranking.
All ten were screened on 10 November 2026 in a desk review, not a factory audit. Seven datapoints were recorded for each entry, including factory address, standards cited, garment-level evidence, MOQ and lead time.
10 UK Boiler Suit and Coverall Manufacturers at a Glance
Each entry follows the same shape: what the company makes, the evidence it publishes, the questions to put to them, and a verdict. Skim the table, then read the entries that fit your order.
| Manufacturer | Base | Garment-level evidence | Best fit | UK-made? | MOQ / lead time |
|---|---|---|---|---|---|
| Wearwell | Tamworth | DoC published for Styles 4926 and 4493 | Auditable UK tenders | Yes — core lines; confirm per SKU | Not published |
| LS International | Wolverhampton | EN ISO 20471, EN ISO 11612 and IEC 61482 cited; DoC on request | Rail, utilities, oil & gas | Yes — stated | Not published |
| B S Suthi & Bros | Oldbury | Not disclosed publicly | CMT and private label | Yes — Made in Britain member | Not published; lead time 4–6 weeks |
| Alpha Solway (Skytec) | Annan, Scotland | Product standards cited; DoC on request | Chemical and hazard coveralls | Yes — stated | Via distributor |
| Seahawk Apparel | Glenrothes, Fife | Not disclosed publicly | Scottish-made branded programmes | Yes — stated | Not published |
| D R Workwear | Birmingham | No public certificate; ISO 9001 and 14001 in progress | Repeat programmes | Yes — stated | Not published |
| Haven Products | Larbert, Falkirk | Company ISO 9001, 14001 and 27001; garment file on request | Low-complexity stock programmes | Yes — stated | Not published |
| Yansport Safetywear | Walsall | DoC PDFs published per named product | Stock and distributor hi-vis | Yes — stated | Via distributor |
| Derby Unitex | Derby | HOSDB, EN ISO 11612 (plus superseded EN 531) and BS 7971 stated; DoC on request | Emergency services, public order | Yes — stated | Not published |
| Ballyclare | Stockport | Garment-level EU DoC published for named styles | Multi-hazard and weatherproof | Yes — stated; confirm per style | Not published |
1. Wearwell — Best for UK tenders that need an auditable factory

Wearwell has manufactured in the UK since 1939 and still runs production from Tamworth, so a tender panel gets a factory address to audit rather than a sales office.
It also publishes garment-level declarations of conformity for named styles: the Megatec 250 (Style 4926) and the Xispal X635 (Style 4493) are downloadable.
That is the evidence buyers usually chase. The range covers boilersuits, FR workwear and hi-vis, which helps when one contract spans several garment types. Confirm the lead-time split between UK and any offshore line.
Wearwell (UK) Limited (Company No. 02993093, incorporated 1994) — Gagarin, Lichfield Road, Tamworth, Staffordshire B79 7TR (established 1939). Phone 01827 63651. ISO 9001 certified by BSI.
- Lock repeat-order controls: same fabric, same pattern, same factory.
- Request certification evidence for each garment, not a company-level certificate, using HSE PPE guidance for compliance language.
🧠 Author’s Take: Wearwell is worth shortlisting for UK tenders that need visible factory accountability and clear lead-time transparency. The trap is assuming every line is UK-made.
🛡️ Our Verdict: Confirm origin by SKU, in writing, before you sign.
2. LS International — Best for rail, utilities and oil & gas programmes

LS International describes more than 50 years in protective workwear, 200+ employees and five manufacturing sites, with UK production in Wolverhampton.
Its made-in-the-UK page cites EN ISO 20471, EN ISO 11612 and IEC 61482: the set rail, utilities and oil and gas buyers ask for.
A cited standard is not a garment file. What matters is the declaration of conformity that names the style, and the site that built it.
LS International Limited — Unit C8, Central Avenue, Hilton Trading Estate, Hilton Road, Wolverhampton WV4 6DW. Phone 01902 497 626.
- Ask which coverall lines are UK-built, by SKU, not by company headline.
- Ask for the DoC for the exact garment, not the company’s ISO 9001 file.
- Test repeat programme support: pattern, fabric and factory-line continuity across orders.
🧠 Author’s Take: Fifty years and five sites describe the company. The tender needs the file for the style you are buying.
🛡️ Our Verdict: Worth a place for certified-PPE sectors, but lock origin and certification per SKU in writing.
3. B S Suthi & Bros — Best for CMT and private-label production

B S Suthi & Bros is a Made in Britain member in Oldbury, trading since 1969 and running 25+ machinists.
It quotes CMT, full factoring and private-label rebranding as one package, which is the white-label distribution model almost word for word. It names a contact and quotes a 4–6 week lead time. Most on this list do neither.
There is no public certification record for protective styles, so FR remains an open question until the technical file arrives.
B S Suthi and Bros Limited (Company No. 10215003, incorporated 2016) — Unit 1, Houghton Street, Oldbury, West Midlands B69 2BB, trading since 1969. Phone +44 121 716 2568.
Check these before bulk:
- Verify factory scale before committing volume.
- Ask what certified-garment capability sits behind protective styles, and check it against the HSE PPE regulations.
- Get it in writing: logo application or fabric substitution can trigger requalification on FR coveralls under UKCA PPE guidance.
⚡ Power Move: Send one tech pack with CMT and factored columns. Compare landed cost, not unit price.
🧠 Author’s Take: Suthi is the most transparent entry on lead time and on who answers the phone. Buy it for CMT and private label, and put FR work through the checklist above before committing.
🛡️ Our Verdict: Strong OEM fit. Lock certification scope and requalification triggers before scale-up.
4. Alpha Solway (Skytec) — Best for chemical and hazardous-environment coveralls

Alpha Solway is part of Globus Group and manufactures at its Annan factory in Scotland. The Skytec range (Chemmaster, Chemsol and Chem FR) is designed and made there, with in-house UKAS-accredited laboratory testing.
For chemical and hazardous-environment coveralls, that is a more relevant record than a generic catalogue.
The question is which coverall styles carry garment-level certification, and whether a CE certificate and a fabric test report are standing in for the technical file.
Alpha Solway Limited, part of Globus Group — Factory 1, Queensberry Street, Annan, Dumfriesshire DG12 5BL (est. 1992). Phone 01461 202452. ISO 9001.
- Ask for the manufacturing site address and the cut-and-sew partner, not a brand owner’s address.
- Request a garment-level EN ISO 13688 test report, not a fabric test.
🧠 Author’s Take: Skytec gloves earn their reputation. Ask for the coverall technical file before assuming it carries the same rigour; on this shortlist, Alpha Solway is a conditional yes.
🛡️ Our Verdict: Only worth a place once garment-level certification is verified in writing.
5. Seahawk Apparel — Best for Scottish-made branded programmes

Seahawk Apparel manufactures in Glenrothes, Fife, and has been part of Scott Direct since April 2022.
The independent Seahawk domain now resolves to a parked page, so the live route runs through Scott Direct. Roughly 20–25 staff cover design, pattern cutting and machining.
The branded angle is real, but decoration is where certified garments fail: thread, backing, reflective placement and trim can undo the certified system.
Send a tech pack that includes embroidery, reflective tape and trim changes, and ask for a sample on the exact certified garment.
Seahawk Apparel, part of Scott Direct since 2022 — 76 Whitecraigs Road, Whitehill Industrial Estate, Glenrothes, Fife KY6 2RX (est. 2005). Phone 01592 630450.
🧠 Author’s Take: Seahawk suits buyers who need customization and programme continuity, provided the parent group’s production site is named in the contract.
🛡️ Our Verdict: Shortlist Seahawk for branded UK programmes, but lock decoration rules and requalification triggers before the first production run.
6. D R Workwear — Best for repeat programmes and continuity

D R Workwear has manufactured in Birmingham since 1985 and describes itself as an owner-managed specialist in boiler suits, trousers and jackets. It is working towards ISO 9001:2015 and ISO 14001, worth timing in a tender rather than assuming certification.
Companies House filings classify it as a micro-entity, so confirm capacity before a multi-site rollout.
D R Workwear Limited (Company No. 07569618, incorporated 2011) — 24a Oxhill Road, Handsworth, Birmingham B21 9RE (est. 1985). Phone 0121 523 4443.
Ask five questions before onboarding:
- MOQ. Per style, per colour, and at reorder.
- Logo methods. Embroidery, print or transfer. Which one alters certified garment status?
- Sample approval. Exact steps, named sign-offs, and one sealed reference sample.
- Size-set management. Who owns the pattern and tracks the size ladder?
- QC controls. AQL 2.5 level, inspection point, and test report per repeat batch.
🧠 Author’s Take: D R Workwear is the continuity play: owner-managed, one Birmingham site, boiler suits as the core line rather than a catalogue add-on.
🛡️ Our Verdict: A solid fit for repeat programmes. Lock MOQ, logo method, sample approval and QC gate in writing. Run a 20-piece pilot across two sizes before contract award.
7. Haven Products — Best for low-complexity stock programmes

Haven Products is a social enterprise in Larbert, Falkirk, founded in 1946. Most of its roughly 160 staff are disabled and disadvantaged adults, which is a real social-value point in a public-sector tender. Its textiles range includes boiler suits, workwear and PPE.
Factory visibility is not the gap. The gap is garment-level EN evidence, MOQ and lead times tied to a named site, and none of it is published.
Haven Products Ltd, a registered charity — 8 Central Boulevard, Larbert, Stirlingshire FK5 4RU (est. 1946). Phone 01324 793013.
Before shortlisting, request the Companies House ownership record and the three items above in writing.
🧠 Author’s Take: Haven Products is a conditional yes for low-complexity coverall programmes. For certified PPE, there is nothing to verify yet.
🛡️ Our Verdict: Hold this one until contract-grade evidence fills the gaps.
8. Yansport Safetywear — Best for stock and distributor-friendly hi-vis

Yansport Safetywear has manufactured at a 20,000 sq ft factory in Walsall since 1989 and sells mainly through distributors.
It publishes EU declarations of conformity for named products, hi-vis and arc-rated sets included. That is ahead of suppliers who only cite standards.
The catalogue covers EN ISO 20471, EN ISO 11611/11612, EN 1149-5 and IEC 61482. Treat FR or chemical-barrier work as unproven until the file for the exact style arrives.
Yansport Safetywear Limited (Company No. 04208237, incorporated 2001) — 91 Frederick Street, Walsall, West Midlands WS2 9NJ, at this site since 1989. Phone 01922 721721.
Ask four questions before treating it as an FR source:
- Garment test evidence. Get the report for the exact style, not the fabric roll.
- Laundering assumptions. How many industrial wash cycles does protection survive? Check the wash rules for that fabric.
- Seam and zip robustness. Request the seam strength figure and zip brand.
- Reproducibility. Can they hold the pattern, fabric mill, and factory years later?
🧠 Author’s Take: Strong for stock and branded uniform programmes. On the FR side, the four questions above decide it.
🛡️ Our Verdict: Shortlist Yansport for stock and branded programmes. Demand garment-level test data, wash limits, seam and zip specs, and a written reorder guarantee before committing.
9. Derby Unitex — Best for emergency-services and public-order coveralls

Derby Unitex designs and manufactures protective clothing in Derby for police, ambulance, fire and security teams.
Its coveralls are made to order with custom badges, and the company states it can supply HOSDB, EN ISO 11612, EN 531 and BS 7971 certified garments alongside non-FR styles.
One caveat: EN 531 was superseded by EN ISO 11612 in 2008.
It is also an approved supplier on public frameworks, including YPO’s PPE and workwear framework, a useful proxy for tender readiness.
The company does not publish garment-level declarations on its own site, so the certificate still has to come by email. Ask for the DoC that names the exact coverall and the standard, not a standards list.
Derby Unitex Limited (Company No. 07479657, incorporated 2010) — Units 31–32, Derwent Business Centre, Clarke Street, Derby DE1 2BU. Phone 01332 298 988.
- Ask who issued the HOSDB and BS 7971 evidence, and what testing sits behind it.
🧠 Author’s Take: Derby Unitex is the strongest fit on this list for public-order and emergency-services coveralls. The documentation is the weak point.
🛡️ Our Verdict: A fit for emergency-services and public-order programmes. Lock the exact standard and DoC per style before the order goes in.
10. Ballyclare — Best for multi-hazard and weatherproof boiler suits

Ballyclare has designed and manufactured protective clothing for more than a century and holds a Royal Warrant for specialist fire kit.
The range includes named boiler suits: the HV27/HV27Y hi-vis quilted boiler suit in GORE-TEX Benbecula fabric and the DryShell boiler suit, plus FR and arc-rated coveralls in Flamemaster 365.
Ballyclare publishes garment-level EU declarations of conformity for named styles, an evidence tier most of this list never reaches.
Ballyclare Limited — The Forum, Hercules Business Park, Bird Hall Lane, Stockport SK3 0UX. Phone +44 844 493 2808.
- Confirm that the exact boiler suit style is made in the UK, not only designed here.
- Treat weatherproof and FR as separate specifications; one garment rarely covers both without a stated standard.
🧠 Author’s Take: Ballyclare is the closest thing on this list to a one-stop multi-hazard boiler suit source.
🛡️ Our Verdict: A fit where one garment has to carry several hazards. Request the declaration for the style you are buying and confirm the production site.
How to Vet a Boiler Suit or Coverall Supplier in the UK?

The weak points above are the raw material. Turn them into a repeatable buying system with this three-step playbook.
Step 1: Define the Hazard Before the Standard
Start with the hazard, not the product code. Heat, flame, welding sparks, low visibility or chemical splash decides the standard.
- Heat and flame: EN ISO 11612 — clothing that protects against heat and flame.
- Welding: EN ISO 11611 — protective clothing for welding and allied processes.
- Low visibility: EN ISO 20471 — high-visibility clothing, test methods and requirements.
- Base garment safety: EN ISO 13688 — general requirements for protective clothing.
Certification applies to one specific fabric and construction combination.
A fabric test report does not prove the garment, and a certified FR coverall can lose compliance after a chest logo is added: embroidery, transfers, reflective tape and trim all affect the certified system.
Lock decoration rules in writing before a quote is requested, and test the exact decorated garment rather than a base shell.
UK Marking Rules for Boiler Suits
Since 1 October 2024, Great Britain accepts either CE or UKCA marking for PPE under the Product Safety and Metrology etc. (Amendment) Regulations 2024.
CE recognition was extended indefinitely, so a CE-marked coverall needs no separate UKCA certificate in England, Scotland or Wales. Northern Ireland follows EU rules and requires CE.
For Category III PPE (chemical protection and many flame and heat applications), conformity has to run through a notified body.
On the CE route that is an EU Notified Body issuing an EU-type examination certificate; on the UKCA route it is a UK Approved Body issuing a UK-type examination certificate.
Ask for the certificate that names the model, not a logo on the label.
Certification Evidence a UK Supplier Should Provide
- Fabric test report: proves the fabric passed a named test, not the garment, seams or trims.
- Garment test report: proves the exact style was tested as built, not the factory quality system or ongoing production.
- EU-type examination certificate: proves the design meets the standard, not every unit produced.
- Notified or Approved Body certificate plus DoC: proves the conformity route is complete for that model, not reorder consistency after a fabric or trim change.
A garment report that cannot name the factory has answered half the question.
Step 2: Verify the Factory and the Technical File
Five questions separate a real technical file from a brochure:
- Where is the garment made, and who owns the pattern?
- What happens if the certified fabric is discontinued? Get the replacement’s certification before approving the substitution.
- What QC thresholds apply to seams, bar-tacks, zips, shrinkage and industrial laundering?
- Can the supplier show a garment-specific test report, not a generic standards claim?
- Which conformity route does the certificate follow, CE or UKCA, and can its number be traced to the issuing body?
Each answer is either a document or a promise, and the How to Choose a Custom Workwear Manufacturer framework turns it into a pass-or-fail checkpoint.
Outside the UK, the Best Custom Workwear Manufacturers list gives a wider pre-screened field.
Step 3: Close the Commercial Checkpoints
Lock the commercial terms:
- Confirm MOQ by style and colour, including reorder MOQ, against the Custom Workwear MOQ benchmark tiers.
- Request a pre-production sample on the certified garment you are buying.
- Get production time in writing, tied to a named factory, and compare it with typical Custom Workwear Production Time.
- Use landed-cost logic, not unit price, because freight, duties and packaging sit on top of Bulk Wholesale Workwear Pricing.
- Check packaging compliance against EU PPWR Workwear Packaging if the order ships into Europe.
- Seal one reference sample and one written spec sheet before award.
🛡️ Our Verdict: The shortlist is a starting point; the playbook is the control. Every competitor gap above becomes a written checkpoint.
UK Manufacturer vs Offshore: Custom Boiler Suits and FR Coveralls
The decision is not ideological. It follows the order size, the hazard, and the audit route.
| Criterion | UK-made | Offshore factory-direct |
|---|---|---|
| Lead time | Shorter for stock; bespoke still 4–10 weeks | 6–10 weeks production plus transit |
| MOQ | Similar quoted floor; higher effective minimums; stock lines vary by supplier | Typically 100 per style |
| Landed cost | Higher unit cost; no freight or import duty | Lower unit cost; add freight, duty and clearance |
| Audit | Easier site visits; CE and UKCA both accepted | Remote audits and third-party inspection |
| Social value | Supports UK manufacturing and local tender scoring | Harder to score in UK public tenders |
| Best fit | Fast replenishment and public-sector social value | Cost-driven programmes, custom builds, scale |
For 200 hi-vis coveralls next month, a UK stockist wins on availability.
For 5,000 branded FR coveralls with a custom pattern, factory-direct production usually wins on landed cost, provided the certification file can be audited remotely.
LantaoWork runs the second model, and the custom coverall manufacturer route is where that arithmetic is easiest to test.
Ready to test a tech pack? Send it for a tech-pack review or dual-source benchmark and the specification, certification scope and commercial terms get checked against the factories in this shortlist. No obligation.
Frequently Asked Questions About Boiler Suit Manufacturers in the UK
1. How do I tell a UK boiler suit manufacturer from a UK supplier?
A UK boiler suit manufacturer cuts and sews the garment in a UK factory. A UK supplier may only hold stock, manage orders or import from overseas.
Ask who owns the pattern and which country the garment ships from, and put country-of-origin wording in the contract by SKU. A supplier that cannot name the cut-and-sew site has not answered the question.
2. Can I add a custom logo to an EN ISO 11612 coverall without affecting compliance?
Not automatically. A logo changes the certified garment system: thread type, backing, placement, density and trim can alter heat resistance or flame behaviour. Ask for garment-level test evidence after decoration, not a fabric report.
A decorated sample should pass the same heat test as the base coverall. Check the exact rule against EN ISO 11612. If the factory cannot prove it, move the logo to a non-protective area or choose another garment.
3. What documents should I ask for before placing a bulk boiler-suit order?
Ask for six items: garment-specific test reports, the EU-type examination certificate naming the model, the declaration of conformity, signed sample approval records, size-set control sheets and written delivery dates from the named production site.
Add reorder continuity terms and verification through Companies House or an equivalent registry.
A sealed reference sample should be part of that package. A fabric certificate sent in place of a garment file is the gap that kills a tender, so get every document before award, not after the first bulk run.
4. What MOQ and lead time should I expect for bespoke workwear or OEM protective coveralls in the UK?
The quoted floor is typically 100 units per style; the effective minimum often lands at 200–300 once fabric, colour and decoration are fixed, and proprietary blends can push it higher. Ask for that floor per style and per colour before comparing quotes across suppliers.
Lead time runs 4–10 weeks from sample sign-off in the UK, and 6–10 weeks offshore before transit. Stock lines can ship in 2–4 weeks subject to availability. The quote itself controls the final number.
Editorial note: No payment was received from the manufacturers listed. LantaoWork manufactures boiler suits and competes with several manufacturers listed here.
Confirm commercial terms, certification scope, and country of origin directly with each supplier before award. The shortlist sets the benchmark; a factory-direct quote completes the comparison.
Leave a Comment
Your email address will not be published. Required fields are marked *